Fuel pressure tester kit for mechanical and electronic injection systems, also suitable for the following systems: K-Jetronic, KE-Jetronic, L/LH-Jetronic, Motronic, MPI, HMPI, EFI, DIGIFANT, MonoJetronic, Opel-Multec, Weber CFI.
The kit includes the following parts:
- 1 pressure gauge, 0 … 10 bar / 0 … 140 psi
- 1 3-way valve
- 3 hoses of 0.25 m each, with quick coupling on both sides
- 30 adapters (coupling connection)
- M 4x1.5 (external thread, angle adapter)
- M12x1.5 (external thread, angle adapter)
- M8x1 (external thread)
- M12x1.5 (external thread)
- M12x1.5 (internal thread)
- M8x1 (internal thread)
- Ø 6 mm, Ø 8 mm (fuel hose, 2-piece)
- M10x1 (external thread)
- M10x1 (external thread, angle adapter)
- M8x1 (internal thread)
- M14x1.5 (internal thread)
- M14x1.5 (external thread)
- M8x1 (external thread, angle adapter)
- M16x1.5 (external thread)
- M10x1 (internal thread)
- 7/16″- 20UNF V6
- Plug connector, Ø 11 mm
- 7/16″-20UNF
- 7/16"-20UNF V6 (Internal thread, angle adapter)
- 7/16"-20UNF V6 (internal thread, angle adapter, rotatable with angle)
- VG 8 (internal thread, angle adapter, adapter with release pin)
- VG 8 (internal thread, adapter with release pin)
- Hose connector, Ø 8 mm, 2-piece
- M14x1.5 (internal thread, with sealing cap)
- Plug connection, Ø 8 mm, 2-piece
- Plug connection, Ø 14 mm, 2-piece
- M12x1.25 (external thread, hollow screw)
- M12x1.5 (external thread, hollow screw)
- M10x1 (external thread, angle adapter)
- M8x1 (external thread, angle adapter)
- 1 extension hose 1.00 m, quick coupling on both sides
- 1 release valve AVE 01 with drain hose
English 
Dutch